Services

Announcements

A River Runs through it

#IPEIA –Pressure Equipment Reliability needs the Collective Knowledge of the Community While viewing the excavation shown in the picture, I noticed water gushing out several feet beneath where I was standing. Asking the site personnel, I found out that the water was from an intermittent underground stream, which may be why the flow was not […]

International Pressure Equipment Integrity Association (IPEIA) 2018 Conference

IRISNDT had a large presence at the IPEIA 2018 Conference. We: 1. Held the workshop “Identifying Corrosion Under Insulation on Aging Plant Piping – Where to Start?” Michael Townsend, from IRISNDT’s New Orleans office, presented to a packed room (even the standing room was full!). The presentation covered the steps to inspect […]

The essential role of non-destructive testing in evaluating stainless steels and corrosion resistant alloys – an interview with Ana Benz, Chief Engineer at IRISNDT

Nondestructive testing (NDT) or nondestructive evaluation (NDE) encompasses a wide group of analysis techniques to evaluate the properties of a material, component or system without causing any damage to the original material. Many industries, such as the oil & gas and petrochemical sectors benefit from having project materials, like stainless steel and corrosion resistant alloys […]

IPEIA Conference March 1 – 3, 2017 – Banff

Please visit us at Booth 47 during the 2017 IPEIA Conference in Banff, Alberta Canada from MARCH 01 – 03, 2017. We have the following events planned: • At 10 A.M. on Wednesday March 01st we are cohosting with the Wood Group “THE GOOD, THE BAD AND THE UGLY OF TURNAROUNDS AND CONTRACTOR USAGE.” • […]

2017 API INSPECTION SUMMIT; IRISNDT Presentation on Wednesday, February 1 at 3:30 p.m

Please visit us at Booth 602 during the 2017 API Inspection Summit in the Galveston Island Convention Center in Galveston, Texas, from January 30th – February 02nd, 2017. At 3:30 p.m. on Wednesday, February 01st, Ana Benz (IRISNDT) will be giving the presentation “Correlating NDE Results with Metallographic Examinations.”

IRISNDT is preparing for commercial robotic internal pressure vessel inspections in 2017 – Dr. Eric Sjerve

Dr. Eric Sjerve from IRISNDT is chairing Sprint Robotics North America (SRNA), a group with the goal of speeding up the implementation of robotic inspection and maintenance solutions for capital intensive industries. This end-user based group is now testing robotic inspection and maintenance solutions in real-world conditions. The group chose the Disaster City test facility […]

IRISNDT at the 2016 International Pipeline Conference (September 26 – 30, 2016)

IRISNDT will be exhibiting at booth #105 on September 27-29 during the 2016 International Pipeline Expo (IPE) – please make sure you visit us! To learn more about or participate in discussions on the Management of Interactive Threats, you might be interested in Tutorial #7 on September 26, 2016 at the International Pipeline Conference (IPC), […]

IRISNDT joins SPRINT Robotics

IRISNDT is pleased to announce that we have signed on as a participant in the SPRINT Robotics Collaborative. IRISNDT is additionally pleased to announce that Dr. Eric Sjerve, IRISNDT’s Chief Technology Officer, has been appointed Chairman of the North American Chapter of the SPRINT Robotics Collaborative. From the SPRINT Robotics website: “The SPRINT Robotics Collaborative […]

WITNESSED NDE Examination Procedure Demonstration – Ultrasonic Phased Array Examination of Welds in Pressure Equipment

Our AUT personnel demonstrated IRISNDT’s Ultrasonic Phased Array Examination of Welds in Pressure Equipment (Procedure #22.6) to ABSA in February 2015. The IRISNDT procedure demonstration documentation in accordance with ASME Section V requirements for Phased Array Weld Examinations is one of the first of a kind given in Alberta. Congratulations to Wes Weber, James Yakemchuk […]

NACE Calgary Section Non-Metallic and Composite Materials Symposium.

Thanks to Glenn Roemer for showing his non-metallic savvy during this successful symposium on January 22, 2015 in Red Deer.

Careers

We welcome people who seek challenging career opportunities with an organization dedicated to providing extremely high quality service to our customers.

Our wide range of services, customers and office locations allows our staff to grow by learning new technologies and taking on new roles.

IRISNDT is a leader in providing non-destructive testing (NDT), inspection, engineering, heat treatment, rope access and specialized software solutions to the oil and gas, petroleum, petrochemical, power generation and pipeline industries. We operate from 25 offices in Canada, the USA and the UK.

We look after our customers. We have maintained a consistent reputation for quality of customer service, advanced and innovative technological applications, and an outstanding safety record.

We look after our employees. We have built this business on credibility and reputation, which has only been achievable by retaining long-term employees. Our product is our people and taking care of our people and their families is what we do. We depend on each other to do our jobs well and safely.

Featured Opportunities

POSTINGS	TITLE	Link To The PDF Job Description	City	Country
#1161	Senior Asset Integrity Engineer	Senior Asset Integrity Engineer	Calgary, Alberta	Canada
#1162	Advanced NDT Inspectors	Advanced NDT Inspectors	Edmonton, Alberta	Canada
#1165	Eddy Current Lead Technician	Eddy Current Lead Technician	Edmonton, Alberta	Canada
#1166	Laser Safety Officers with Rope Access (IRATA) Level 1 Certifications	Laser Safety Officers with Rope Access (IRATA) Level 1 Certifications	Edmonton, Alberta	Canada
#1167	NDT Technicians; Advanced NDT Technicians; API Inspectors; CWB Inspectors; CEDOs	NDT Technicians; Advanced NDT Technicians; API Inspectors; CWB Inspectors; CEDOs	Alberta Area	Canada
#1168	Administrative Assistant	Administrative Assistant	Edmonton, Alberta	Canada