Tube Inspection Technologies

Services

Announcements

We still have space available on our upcoming IRATA courses running running March 20th to 24th and March 27th to 31st

Did you know IRISNDT Edmonton offers IRATA-approved training in all levels? Limited space is available on our upcoming courses running March 20th to 24th and March 27th to 31st. Whether you are new to IRATA, looking to upgrade your skills, or you need to recertify, our comprehensive training program will equip you to carry out […]

Struggling with too many piping CMLs (Corrosion Monitoring Locations)?

A training course on this subject, presented by IRISNDT, will be held on Tuesday, February 25th, during the 2020 IPEIA Conference in Banff, Alberta, Canada. The course will introduce you to a to a Risk-Based Criticality Assessment Approach to optimize the number of CMLs. For registration and other details, see the below link: https://ipeia.com/wp-content/uploads/2020/01/IRISNDT_ad.pdf. […]

“Tips for Tanks and Vessels” Made it to the Cover Page of the December 2019 Chemical Engineering Magazine

IRISNDT is proud to note that the Chemical Engineering Magazine has published Ana Benz’s article “Tips for Tanks and Vessels” as the December 2019 issue cover story. The article highlights a tank with cracks in the floor to wall joint. Interested in the other cases? Read the Chemical Engineering Magazine’s December 2019 issue.

A River Runs through it

#IPEIA –Pressure Equipment Reliability needs the Collective Knowledge of the Community While viewing the excavation shown in the picture, I noticed water gushing out several feet beneath where I was standing. Asking the site personnel, I found out that the water was from an intermittent underground stream, which may be why the flow was not […]

International Pressure Equipment Integrity Association (IPEIA) 2018 Conference

IRISNDT had a large presence at the IPEIA 2018 Conference. We: 1. Held the workshop “Identifying Corrosion Under Insulation on Aging Plant Piping – Where to Start?” Michael Townsend, from IRISNDT’s New Orleans office, presented to a packed room (even the standing room was full!). The presentation covered the steps to inspect […]

The essential role of non-destructive testing in evaluating stainless steels and corrosion resistant alloys – an interview with Ana Benz, Chief Engineer at IRISNDT

Nondestructive testing (NDT) or nondestructive evaluation (NDE) encompasses a wide group of analysis techniques to evaluate the properties of a material, component or system without causing any damage to the original material. Many industries, such as the oil & gas and petrochemical sectors benefit from having project materials, like stainless steel and corrosion resistant alloys […]

IPEIA Conference March 1 – 3, 2017 – Banff

Please visit us at Booth 47 during the 2017 IPEIA Conference in Banff, Alberta Canada from MARCH 01 – 03, 2017. We have the following events planned: • At 10 A.M. on Wednesday March 01st we are cohosting with the Wood Group “THE GOOD, THE BAD AND THE UGLY OF TURNAROUNDS AND CONTRACTOR USAGE.” • […]

2017 API INSPECTION SUMMIT; IRISNDT Presentation on Wednesday, February 1 at 3:30 p.m

Please visit us at Booth 602 during the 2017 API Inspection Summit in the Galveston Island Convention Center in Galveston, Texas, from January 30th – February 02nd, 2017. At 3:30 p.m. on Wednesday, February 01st, Ana Benz (IRISNDT) will be giving the presentation “Correlating NDE Results with Metallographic Examinations.”

IRISNDT is preparing for commercial robotic internal pressure vessel inspections in 2017 – Dr. Eric Sjerve

Dr. Eric Sjerve from IRISNDT is chairing Sprint Robotics North America (SRNA), a group with the goal of speeding up the implementation of robotic inspection and maintenance solutions for capital intensive industries. This end-user based group is now testing robotic inspection and maintenance solutions in real-world conditions. The group chose the Disaster City test facility […]

IRISNDT at the 2016 International Pipeline Conference (September 26 – 30, 2016)

IRISNDT will be exhibiting at booth #105 on September 27-29 during the 2016 International Pipeline Expo (IPE) – please make sure you visit us! To learn more about or participate in discussions on the Management of Interactive Threats, you might be interested in Tutorial #7 on September 26, 2016 at the International Pipeline Conference (IPC), […]